REGAINING DEXTERITY: A CASE REPORT ON PROSTHETIC REHABILITATION OF A LOST FINGER USING HEAT CURE ACRYLIC RESIN

Abstract

This case report presents the successful prosthetic rehabilitation of a patient who experienced the loss of a finger due to a traumatic accident. The rehabilitation process involved the use of heat cure acrylic resin to fabricate a custom-made finger prosthesis, aiming to restore both the aesthetics and functionality of the lost digit. The patient, a 42-year-old male, underwent careful assessment and measurements to ensure the precise design and fit of the prosthesis. The heat cure acrylic resin, known for its biocompatibility and durability, was utilized to create a lifelike and flexible prosthesis. The fitting process involved iterative adjustments to achieve optimal alignment and comfort for the patient. As a result of the prosthetic intervention, the patient regained dexterity and experienced a significant improvement in daily activities and overall quality of life. This case report highlights the effectiveness of heat cure acrylic resin in finger prosthetics and underscores the importance of individualized approaches in achieving successful outcomes for patients with digit loss.

Keywords:

Prosthetic rehabilitation, finger prosthesis, heat cure acrylic resin

References

Vikas B. Kamble et al. Finger Prostheses for Multiple Finger Amputations: Two Case Reports. Nat J Med Dent Res 2013; 1(2) : 38-42

Aydin C, Karakoca S, Yilmaz H. Implant-retained digital prostheses with custom-designed attachments: A clinical report. Journal of Prosthetic Dentistry. 2007; 97: 191-95.

Pereira BP, Kour AK, Leow EL and Pho RW. Benefits and use of digital prostheses. J Hand Surg Am 1996; 21(2): 222–228.

Pilley MJ, Quinton DN. Digital prostheses for single finger amputations. J Hand Surg [Br] 1999; 24(5):539-41

Jean Pillet, Evelyn J. Mackin.O and P Library Aesthetic Restoration. Atlas of Limb Prosthetics: Surgical, Prosthetic, and Rehabilitation Principles: Partial-Hand Amputations.

Udita S Maller KaSM. Maxillofacial prosthetic materials past and present trends. JIADS. 2010; 1(2):25-30