REVOLUTIONIZING ENDODONTICS: UNVEILING THE FUTURE WITH 3D PRINTING

Abstract

This paper explores the groundbreaking impact of 3D printing technology on the field of endodontics, offering a comprehensive look into the future of dental treatments. Endodontics, the branch of dentistry focusing on the diagnosis and treatment of dental pulp diseases, has witnessed significant advancements with the integration of 3D printing. By enabling the creation of intricate and personalized dental models, tools, and implants, 3D printing revolutionizes the traditional approaches to endodontic procedures. This article delves into the various applications of 3D printing in endodontics, including the fabrication of anatomically precise models for preoperative planning, custom-made surgical guides for enhanced precision, and patient-specific root canal instruments for optimal clinical outcomes. Moreover, the paper addresses the challenges and opportunities presented by this transformative technology in the dental field, envisioning a future where 3D printing redefines the landscape of endodontic care.

Keywords:

3D printing, endodontics, dental pulp diseases

References

Rengier F, Mehndiratta A, von Tengg-Kobligk H et al. 3D printing based on imaging data: Review of medical applications. Int J CARS. 2010; 5(4):335–41.

Jacob GS. Three-Dimensional Printing of Dentures Using Fused Deposition Modeling. Inside Dental Technology. 2013;4.

Dawood A, Marti B, Jackson VS, et al. 3D printing in dentistry. British Dental Journal. 2015; 219:521–9.

Mawere C. The impact and application of 3D printing technology. International Journal of Science and Research (IJSR). 2014; 3(6):2148–52.

Chia HN, Wu MB. Recent advances of 3D printing of biomaterials. Chia and Wu Journal of Biological Engineering. 2015; 9:4.

Van Noort R. The future of dental devices is digital. Dent Mater. 2012; 28(1):3–12.

Zein I, Hutmacher DW, Tan KC, Teoh SH. Fused deposition modeling of novel scaffold architectures for tissue engineering applications. Biomaterials. 2002; 23:1169–85.

Nayar S, Bhuminathan S, Bhat WM. Rapid prototyping and stereolithography in dentistry. J Pharm Bioallied Sci. 2015;7:S216- S219.

Kruth JP, Vandenbroucke B, van Vaerenbergh J, Naert I. Digital manufacturing of biocompatible metal frameworks for complex dental prostheses by means of SLS/SLM. In: Da Silva Bartolo PJ: Virtual modeling and rapid manufacturing. London/Taylor & Francis Group; 2005.

Xu F, Wong YS, Loh TH. Toward generic models for comparative evaluation and process selection in rapid prototyping and manufacturing. J Manuf Syst. 2000;19:283-296.